I’ve been getting repeated emails from my ISP about “exceeding my bandwidth cap” and they feel very incorrect.

My current router is a Cisco RV260, and it doesn’t have a great way of tracking traffic. (There’s a port traffic screen that does give tx/rx bytes, but no way to see any date ranges).

Is there anything out there that can give an accurate account of Internet traffic? It would be nice if I could see destination domain/IPs, just for kicks and giggles, but an overall traffic count is all I really need.

Thanks!

  • lemmyng@beehaw.org
    link
    fedilink
    English
    arrow-up
    6
    ·
    1 year ago

    The RV260 supports SNMP. You can use that with a network monitoring tool of your choice to get ifInOctets/ifOutOctets data. The rate of change on those numbers is then the amount of traffic sent/received.

    • Naate@beehaw.orgOP
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 year ago

      Ah. Good to know! I’m starting to dive down this rabbit hole, and we’ll see where it takes me. Thanks :)

  • Brickfrog@lemmy.dbzer0.com
    link
    fedilink
    English
    arrow-up
    4
    ·
    1 year ago

    Are you asking for new router suggestions? Or you meant bandwidth monitoring for just one device on your network?

    That sort of info is best recorded at the router level. pfSense has packages you can install that record bandwidth usage & are useful for that. Not sure about OPNsense but I think (?) that would have something similar.

    • Naate@beehaw.orgOP
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 year ago

      I’m intending to upgrade to a pfSense router and some other switch in the future. This is just supposed to be a temporary-ish investigation into the potential fuckery coming from my ISP.

      • towerful@beehaw.org
        link
        fedilink
        English
        arrow-up
        3
        ·
        1 year ago

        I used to use pfSense. It’s great.
        I recently moved to opnSense… And I think it’s better.
        Both are good, both are BSD, both have similar settings (tutorials are mostly interchangeable)… But opnSense just does it better, updates more frequently, nicer UI etc.

        If you are talking to yours ISP, it’s worth getting a bridge modem, and settings details for your own router.
        This modem will turn “isp” into ethernet, then your opnSense/pfSense can make the actual connection. This means it gets the public IP directly.

        • Naate@beehaw.orgOP
          link
          fedilink
          English
          arrow-up
          1
          ·
          1 year ago

          I’m already using my own modem, none of that locked-down rental nonsense from my isp.

          What hardware do you use for pf/opnSense? All of the recommended stuff I’ve seen is almost prohibitively expensive for my home networking budget.

          • towerful@beehaw.org
            link
            fedilink
            English
            arrow-up
            1
            ·
            1 year ago

            My home network has one of those fanless 4 port doodaas from Amazon/eBay if you search for pfSense.
            Never had an issue with it, I’m on 300/100mbit broadband tho.

            For another project for 10gbps networking, I used a refubed single-socketed dell r630. Probably massively overkill. Also, never saw traffic anywhere near 10gbps… So can’t really comment on that.

            • Naate@beehaw.orgOP
              link
              fedilink
              English
              arrow-up
              2
              ·
              edit-2
              1 year ago

              Yeah, those little micro units are what I had seen recommended. $300-400 is definitely pushing it for me. Especially when I would also want a bigger switch to accompany it.

              Guess I need to stop eating avocado toast.

              Edit: how is the stability/uptime for those little machines? Historically, I’ve always had problems with my routers needing to be rebooted at least once a month after they’ve been in service for 18-24 months. Even my current “business class” cisco router is crapping out on me every month.

              • towerful@beehaw.org
                link
                fedilink
                English
                arrow-up
                1
                ·
                1 year ago

                My home box ran for a few years with no issues, until I started having DNS issues. I’m fairly certain that was unbound and the blocklists I had selected, tho.
                I set up a Cron job to update the block lists every night, and give unbound service a restart.
                It’s been solid since then, and my DNS issues have disappeared.

                Now, I am checking for updates and installing those every few months. So it gets a restart when that happens.

                You could get a refurbished SFF computer that has a low profile PCIe slot, and put an Intel 4 port network card in it.
                Would probably cost $150 tops. And its a solid entry! Certainly, that’s what I used before I bought one of the fanless network appliance type things.

                • Naate@beehaw.orgOP
                  link
                  fedilink
                  English
                  arrow-up
                  1
                  ·
                  1 year ago

                  I have my old Athlon fx lying around. Needs a case, psu, and the nic… Hmmmm

  • TheOtherJake@beehaw.org
    link
    fedilink
    English
    arrow-up
    3
    ·
    1 year ago

    I prefer to run hardware supported by OpenWRT or DDWRT. These have monitoring and firewall options under access control.

    If you are not the type to flash your own hardware, pcWRT might be an option. It is small business consisting of a dude in Texas that created a simplified front end for OpenWRT. You just have to trust him, which I haven’t had a problem with, and is probably better than trusting whatever underpaid person has access to similar interfaces for whatever commercial vendor you choose. He has a well secured SSH used to send out occasional updates for the device automatically. His setup does not give you access to the underlying OpenWRT system behind his front end, but with a USB to serial converter and a port on the board you can access OpenWRT in a terminal. I have it setup to log any activity and never had any issues. I’m no expert, but I did install Gentoo once.

    https://shop.pcwrt.com/collections/all

    No affiliation/not an affiliate link. Beware that some people pushing his stuff are doing an affiliation deal. Also, while his stuff is nice and relatively simple, it has more value in the past when OpenWRT was much harder to setup on your own. OpenWRT is open source but the pcWRT frontend is not.

    • Naate@beehaw.orgOP
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 year ago

      I feel like it’s just me, but all of my devices with Open/DDWRT crap out after a couple years. Even well-reviewed prosumer-grade gear ends up becoming wildly unreliable in an unacceptably short amount of time. I had to double-check, and my order history puts me at a new router every 2-3 years. This “business class” RV260 will be hitting 2 years in the fall, and I’m already experiencing wonky behavior where it needs to be rebooted regularly. Maybe it’s just an unspoken truth that anything below true “enterprise tier” kit requires a weekly reboot. I should just put it on an outlet to cycle the power every Sunday at 2am or something…

      That said, I do love DDWRT!

      • TheOtherJake@beehaw.org
        link
        fedilink
        English
        arrow-up
        2
        ·
        1 year ago

        Hey, I thought of mentioning, but got sidetracked and forgot. Most of the dozen or so consumer grade routers I have hacked around with seem to have less than optimal placement of DC stepdown converters located around the processor and radio circuit blocks. I mean, they appear to be optimised for radio as the primary design constraint, not for what is best for the DC converter operation. They tend to place electrolytic capacitors in close proximity to circuit blocks that get quite warm. I can’t say how often capacitors are creating problems, but it would not surprise me if this is the cause of many issues for many people after a year or two. I can say that I had problems with a cable company provided modem a few years ago. It had an obvious leaky cap and several that were around 25% out of spec, along with a couple identical parts that were around 5% out as I would expect with my typical shelf stock. Replacing all of them fixed the modem.

        • Naate@beehaw.orgOP
          link
          fedilink
          English
          arrow-up
          1
          ·
          1 year ago

          This is actually a great theory. I’ve fixed several monitors and TVs that were just bad capacitors. It’s a logical conclusion with these, too.