• ph00p@lemmy.world
    link
    fedilink
    English
    arrow-up
    4
    arrow-down
    16
    ·
    1 year ago

    You can just print that shit now.

    Imagine if these crazy fucks didn’t already have guns and they just discovered printable ones, I think that would have been a worse outcome.

    • Margrave@lemmy.world
      link
      fedilink
      English
      arrow-up
      10
      arrow-down
      2
      ·
      1 year ago

      Please elaborate as to how that would be worse. At least half these nutters wouldn’t be able to figure out how to use a printer, let alone a 3d printer.

      • Intralexical@lemmy.world
        link
        fedilink
        English
        arrow-up
        6
        arrow-down
        1
        ·
        1 year ago

        This thread has, predictably, devolved into a hugely disrespectful exchange given the linked post.

        But as an aside, I shudder to think of trying to design an additively manufactured part that would reliably contain a propellant blast using anything less than an industrial $100k-$1m DMLS or at least really really good SLS machine. If the goal is to harm somebody using a 3D printer, you’d probably be better off bashing them over the head with it.

        • aidan@lemmy.world
          link
          fedilink
          English
          arrow-up
          4
          ·
          1 year ago

          Full plastic guns generally don’t last very long- but they have been proven to somewhat work since 2013. Now there are more stable designs that use off-the-shelf plumbing parts with plastic components. There are also designs that can be CNC’d with a cheap machine

    • Tenthrow@lemmy.worldM
      link
      fedilink
      arrow-up
      7
      arrow-down
      3
      ·
      1 year ago

      Why does everyone thing 3D printing is magic? You’re not going to be 3D printing weapons that can kill scores of poeple. Any firearm printed on an FDM printer is lucky to fire once without injuring the dipshit wielder.

      • 👁️🫦👁️@lemm.ee
        link
        fedilink
        English
        arrow-up
        3
        arrow-down
        1
        ·
        1 year ago

        This comment betrays a lack of understanding around 3d printed firearms.

        Of course there are your (nearly) fully plastic single shots like the Harlot that fire small calibers and dont always last long.

        On the other hand, there’s plastic lowers (the only part considered a firearm and thus the onlynpart that needs to be bought through an FFL) for AR15s that use off the shelf plumbing supplies for the pressure bearing components.

        The files are readily available and able to be printed on low end FDM printers with little adjustment and troubleshooting completely bypassing the need to purchase a firearm from a dealer.