I understand traditional methods don’t work with modern SSD, anyone knows any good way to do it?

  • User_already_exist@lemmy.worldOP
    link
    fedilink
    arrow-up
    2
    ·
    7 months ago

    Thanks for this informative answer. Then it would make sense that it took only 1 second, then again, I have a modern Asus motherboard (AM5) with a Western Digital NVMe drive, and that drive isn’t listed as Secure Erase compatible on Asus motherboard. I will download the WD dashboard and do it that way, I didn’t know it existed before I posted this question.

    • Skull giver@popplesburger.hilciferous.nl
      link
      fedilink
      English
      arrow-up
      3
      ·
      7 months ago

      SSD erasure is a standard(ish) command. It’s best not to assume it works if there’s no tested compatibility, but I also wouldn’t expect it not to work, unless you notice that the data on the drive still exists (i.e. you boot the machine and there’s already a partition on there).

      There are actually two types of erase commands for NVMe drives (“cryptographic erase” for the encryption method I mentioned, and “block erase” for actually wiping all cells). There’s a command for “user data erase” that lets the SSD decide which of the two options to use, which I assume most tools will do.

      I didn’t know WD had a tool, that’s probably your best bet! While you’re at it, also check for firmware updates, it may just help the next owner enjoy the drive for a while longer if you’ve got a buggy SSD that you didn’t know about.