Why doesn’t every computer have 256 char domain name, along with a private key to prove it is the sole owner of the address?

Edits: For those technically inclined: Stuff like DHCP seems unnecessary if every device has a serial number based address that’s known not to collide. It seems way more simple and faster than leasing dynamic addresses. On top of that with VOIP I can get phone calls even without cell service, even behind a NAT. Why is the network designed in such a way where that is possible, but I can’t buy a static address that will persist across networks endpoint changes (e.g. laptop connecting to a new unconfigured wifi connection) such that I can initiate a connection to my laptop while it is behind a NAT.

  • Yes, it would be a privacy nightmare, I want to know why it didnt turn out that way
  • When I say phone number, I mean including area/country code
  • AFAIK IP addresses (even static public ones) are not equivlent to phone numbers. I don’t get a new phone number every time I connect to a new cell tower. Even if a static IP is assigned to a device, my understanding is that connecting the device to a new uncontrolled WiFi, especially a router with a NAT, will make it so that people who try to connect to the static IP will simply fail.
  • No, MAC addresses are not equivalent phone numbers. 1. Phone numbers have one unique owner, MAC addresses can have many owners because they can be changed at any time to any thing on most laptops. 2. A message can’t be sent directly to a MAC address in the same way as a phone number
  • Yes, IMEI is unique, but my laptop doesn’t have one and even if it did its not the same as an eSim or sim card. We can send a message to an activated Sim, we can’t send a message to an IMEI or serial number
    • lemmyng@lemmy.ca
      link
      fedilink
      English
      arrow-up
      17
      arrow-down
      1
      ·
      7 months ago

      Sure they can. If you put a network behind a router they will share an egress/ingress IP. And there are certain high availability setups where computers share IPs in the same subnet for hot/standby failover.

      • JesterIzDead@lemm.ee
        link
        fedilink
        arrow-up
        2
        arrow-down
        20
        ·
        7 months ago

        Yes, but no. The public IP is that of the router, which NATs packets to each host, each of which must have a unique private IP. The public IP does not reference or identity hosts behind the router. And that’s not how HA works. Only one host is assigned the active IP at one time.

        • meteokr@community.adiquaints.moe
          link
          fedilink
          arrow-up
          9
          arrow-down
          2
          ·
          7 months ago

          So computers can share IP’s then right? By your example they are sharing their public IP. From the perspective of the server you are connecting to, all the machines on your LAN have the same IP. Same way multiple physical phones can be connected to a single landline, all those phones share the same number.

        • lemmyng@lemmy.ca
          link
          fedilink
          English
          arrow-up
          5
          arrow-down
          3
          ·
          7 months ago

          When you do call routing with a PBX each phone has an unique extension, equivalent to the private IP of each host.

          Oh, and there’s also anycast, which is literally multiple active devices sharing an IP.

      • JesterIzDead@lemm.ee
        link
        fedilink
        arrow-up
        3
        arrow-down
        11
        ·
        7 months ago

        Yes, but no. The public IP is that of the router, which NATs packets to each host, each of which must have a unique private IP. The public IP does not reference or identity hosts behind the router.