• Madbrad200@lemmy.world
    link
    fedilink
    English
    arrow-up
    25
    ·
    1 year ago

    Just use qBittorrent and integrate Jackett search into it. You can search all your favourite torrent sites within seconds. The best casual setup out there

        • lemming007@lemm.ee
          link
          fedilink
          English
          arrow-up
          2
          ·
          1 year ago

          But don’t you need the rest of the *arr apps for Jackett as well?

          I just want to search the damn public torrent sites without having to install a dozen of applications.

          • Madbrad200@lemmy.world
            link
            fedilink
            English
            arrow-up
            5
            ·
            edit-2
            1 year ago

            No you don’t. Infact, most people would recommend using Prowlarr instead if you want integration with *arr apps.

            It supports hundreds of public trackers (as well as private & semi-private ones). Up to you which you enable.

            Jackett integrates directly into qBittorrent. You don’t need anything else. All you need is 1) Jackett 2) qBittorrent.

  • Thormjolnir@lemmy.fmhy.ml
    link
    fedilink
    English
    arrow-up
    20
    ·
    1 year ago

    Get jackett, add all of the public trackers, plus any other trackers you may be a part of, and just search really.

  • Brickfrog@lemmy.dbzer0.com
    link
    fedilink
    English
    arrow-up
    13
    ·
    1 year ago

    “Best” is probably going to be private torrent trackers.

    But if you meant public torrent indexers then the top ones in terms of web traffic are 1337x, ruTracker, TPB, Rutor, & TorrentGalaxy.

    Most people that were using RARBG have ended up at 1337x and TorrentGalaxy.

    For what it’s worth if you just need a website to search the old RARBG torrents https://rarbg.best might be a good fit.

    PS A lot of these sites are also linked at the other torrent site community [email protected]

  • nieceandtows@lemmy.world
    link
    fedilink
    English
    arrow-up
    10
    ·
    1 year ago

    I’ve sometimes found that 1337x torrents show bigger seed leech numbers but don’t really match up when downloading (May be it’s something to do with my vpn setup). I’ve found magnetdl to be more accurate with seed leech numbers

    • dodgypast@vlemmy.net
      link
      fedilink
      English
      arrow-up
      8
      ·
      1 year ago

      If you don’t have port forwarding and the seeder doesn’t then you won’t see them.

      A lot of casual torrent users won’t know about this so it’s a common issue on public trackers.

        • jws_shadotak@lemmy.world
          link
          fedilink
          English
          arrow-up
          2
          ·
          1 year ago

          If you forward a port on your network (or VPN) and point your torrent software towards that port, you are now an “active” node. You can communicate with anyone else, forwarded or not.

          If you leave it closed (passive node), you can only communicate with active nodes. With large torrents, this isn’t an issue because there’s more than enough active nodes to send the data.

          Port forwarded: talk to anyone, even closed
          Port closed: only talk to port forwarded people and hope that small torrents have someone with a forwarded port.

            • jws_shadotak@lemmy.world
              link
              fedilink
              English
              arrow-up
              1
              ·
              1 year ago

              Not typically but it can vary depending on which protocol and which provider you use. Best to check yourself using something like ipleak.net and see if there’s any identifying info on there while you’re connected.

    • DishonestBirb@lemmy.world
      link
      fedilink
      English
      arrow-up
      4
      ·
      1 year ago

      if you have TCP only and decentralized peers/peer exchange/local peers turned off in qbittorrent (a good security idea if you’re using a VPN to torrent already), you’ll get added security at the cost of less peers. Not to say that’s for sure what’s going on for you, but if you have sane settings for security, it could well be the cause of the discrepancy.

      • nieceandtows@lemmy.world
        link
        fedilink
        English
        arrow-up
        2
        ·
        1 year ago

        Thanks for the advice. It looks like I already have those settings turned on. Would you recommend I turn them off? I know it’s gonna result in even fewer peers, and I haven’t had any security issues over the past couple of years while it’s been running, but is it something that needs to be done on servers like mine? (I have windscribe that I turn on along with qbittorrent, and when I turn it off, I turn them both off at the same time)

    • Brickfrog@lemmy.dbzer0.com
      link
      fedilink
      English
      arrow-up
      3
      ·
      1 year ago

      A lot of torrent sites do not regularly update the seed/peer count on torrents listed there. Or they only do it on some sort of daily/weekly schedule. In other words the older the torrent is the more likely the seed count is going to be wrong.

      I’m not sure about 1337x specifically but you could probably tell by comparing numbers for new torrents vs old torrents listed there.

    • Icarus@lemmy.ml
      link
      fedilink
      English
      arrow-up
      3
      ·
      1 year ago

      I think it’s because 1337x updates the seeds count periodically, and sometimes it doesn’t get updated for a while

  • dudemanbro@lemmy.dbzer0.com
    link
    fedilink
    English
    arrow-up
    4
    ·
    1 year ago

    TG and 1337 are pretty good and have me covered. I also have a copy of the RARBG database that has the hashes that I use if I want to find something from there. Pretty easy to get the magnets from Qbit and then save the magnet back as a .torrent and then check if there are already cached in a debrid service. Pretty easy and simple