As in, are there some parts of physics that aren’t as clear-cut as they usually are? If so, what are they?

  • TauZero@mander.xyz
    link
    fedilink
    English
    arrow-up
    1
    ·
    1 year ago

    Ok, I thought about it some more, and I want to make a correction to my description! The twin photon does collapse, but it doesn’t collapse to a single point or a single path. It collapses to a different superposition, a subset of its original wavefunction.

    I understand it is an option even under Copenhagen. So in your two-electron example, where your have 1/sqrt(2)(|z+z-> + |z-z+>), when you measure your first electron, what if instead of measuring it along z+ you measure it along z+45°? It collapses into up or down along that axis (let’s say up), and the entangled second electron collapses too, but it doesn’t collapse into z-135°! The second electron collapses into a superposition of (I think) 1/2 |z+> + sqrt(3)/2 |z-> . I.e. when you measure the second electron along z+, you get 25% up and 75% down. The second electron is correlated to the first, but it is no longer the exact opposite to the first, because the axis you measured the first at was not z+ but inclined to it. There is exists no axis that you could measure the second electron at and get 100% up because it is not a pure state, it is still in superposition.

    So back to the quantum eraser experiment, when the first photon hits the screen D0 and collapses, say at position 1.5, the twin photon collapses to a sub-superposition of its state, something like 80% path A and 20% path B. It still takes both paths, but in such a manner that if you choose to measure which-path information at detector D3 it will be more strongly correlated with path A, and if you choose to measure the self-interference signal from the mirror at D1 or D2, it will still self-interfere and will be more strongly correlated with detector D1. What do you think?

    • FlowVoid@midwest.social
      link
      fedilink
      English
      arrow-up
      1
      ·
      edit-2
      1 year ago

      In the electron example, if the two electrons are entangled then the wave functions must be the shared. The new superposition for the second electron would therefore be shared with the first electron. So if you measured the second electron along z+ and got up, then if you measured the first electron again, this time along z+, it would give down.

      Likewise if the twin photon is still in superposition, then the first photon is also in superposition. Which is hard to accept in the Copenhagen interpretation, given that the first photon has been absorbed. If absorption doesn’t completely collapse a wave function, then what does?

      • TauZero@mander.xyz
        link
        fedilink
        English
        arrow-up
        1
        ·
        1 year ago

        So if you measured the second electron along z+ and got up, then if you measured the first electron again, this time along z+, it would give down.

        Right! So what happens when you have two z+z- entangled electrons, and you measure one along z+45° and then the other along z+0°? What would happen if you measure the second electron along z+45° as well?

        • FlowVoid@midwest.social
          link
          fedilink
          English
          arrow-up
          2
          ·
          edit-2
          1 year ago

          Entangled electrons are entangled in all directions. If you measure one along any direction, you can completely predict the measurement of its pair in the same direction.

          In other words, measuring one along X and its pair at Y is equivalent to measuring one along X and then measuring the same one again at Y (accounting for the sign shift in the pair, of course).

          • TauZero@mander.xyz
            link
            fedilink
            English
            arrow-up
            1
            ·
            1 year ago

            Hmm interesting. I may have been mistaken about the electrons only being entangled in a single direction. I thought that if you prepared a pair of electrons in state 1/sqrt(2) (|z+z-> + |z-z+>) and then measured it in y there would be no correlation, but based on: https://physics.stackexchange.com/questions/700218/intuition-for-results-of-a-measurement-of-entangled-spins
            https://physics.stackexchange.com/questions/385477/what-is-the-quantum-state-of-spin-1-2-particle-in-y-direction
            if I had done the 90° rotation properly, the math works out such that the electrons would still be entangled in the new y+ basis! There is no way to only entangle them in z alone - if they are entangled in z they are also entangled in x and y. My math skills were 20 years rusty, sorry!

            I still think my original proposition, that in the DCQEE under Copenhagen, an observation that collapses one photon, collapses the other photon to a sub-superposition, can be salvaged. In the second stackexchange link we are reminded that for a single electron, the superposition state 1/sqrt(2) (|y+> - |y->) is the same as |z+> state! They describe the same wavefunction psi, expressed in different basis: (y+,y-) vs. (z+,z-). When we take a single electron in superposition 1/sqrt(2) (|z+> + |z->) and measure it in z, and it collapses to, say, z+, we know that it is a pure state in z basis, but expressed in y basis it is now a superposition of 1/sqrt(2) (|y+> - |y->)! Indeed if we measure it now in y, we will get 50% y+ and 50% y-.

            So in DCQEE when you collapse the first photon into a single position on the screen, the twin photon does collapse, but its basis is not expressed in terms of single positions! It’s some weird agglomeration of them. If you were to take that “pure” state and express it in terms of position basis, you would get a superposition of, say, 80% path A and 20% path B.

            • FlowVoid@midwest.social
              link
              fedilink
              English
              arrow-up
              2
              ·
              edit-2
              1 year ago

              Well, if the second photon is in a new, weird superposition then the first photon must also be in the same new, weird superposition. Again, I don’t that’s compatible with Copenhagen given that the first photon no longer exists.

              Note by the way that 50% y+ and 50% y- is how all photons start. So if that’s also the final state then there is no reason for it to prefer any detector over the others.

              • TauZero@mander.xyz
                link
                fedilink
                English
                arrow-up
                1
                ·
                1 year ago

                50% y+ and 50% y- is how all [electrons] start

                Yeah, but when you start with a 50% z+ / 50% z- electron, and you measure it and get say z+, it is now 100% z+, right? If you measure it again, you will always get z+. And then you give a bunch of them to your buddy with an identical lab and an identical Stern-Gerlach apparatus and and they say “hey, I measured your electrons that you said were 100% z+, and I’m getting 50% z+ 50% z-”. And you say “dude! your lab is in China! your z+ is my y+! you have to do coordinate rotation and basis substitution! if you look at my pure electron in your sideways basis, it’s in superposition for you”.

                When the first photon hits the screen, the basis is the screen basis. Each position on the screen - 1.4, 1.5, 1.6, etc - is an eigenvector and the first photon collapses to one of those eigenvectors. The second photon collapses too, but you are wrongly equating the positions on the screen and positions on paths A/B as if they are in the same basis. They are not! You were just misled to think they are the same basis because they are both named “position”, but they are as different as the z+ axis in America is different from z+ axis in China.

                The second photon collapses into the screen basis eigenvector 1.5 but that 1.5 does not correspond to any single location on path A or path B. If you do the basis substitution from screen basis into path basis, you get something like 80% path A and 20% path B (and something weird with the phases too I bet). Does that sound accurate?