“Bovine Cult of the Dead” is obviously Cult of the Dead Cow

“The Melody of Buried Bells” a reference to the Breakup of the Bell System and the ever recombining Baby Bells?

I initially didn’t do enough of that in my PhD thesis (CS, about some weird non-frame-based imaging tech that is still only of academic interest), and my committee demanded I add more stake-claiming favorable comparisons to other tech to my introduction before I submitted.

I see a lot of articles talking about the white elephants that might be lost from public view, which is probably the biggest tragedy, using their KI-10 as an example.

The one I’m most worried about from that collection is that they have the last known operational CDC6000 series machine (Theirs is a slightly smaller CDC6500, the flagship CDC6600 is the machine that made Seymour Cray famous, it fucked so hard it was 3x as fast as the previous title holder when came out in 1964 and was still the fastest machine in the world until 1969… when it was replaced by the derived, upgraded CDC7600 from 1969-1975).

It’s a 12,000lb, 80" tall, 165" on a side monster that draws 30kW (at 208V/400Hz), I haven’t heard a plan for it, and there are very, very few possible long-term-secure homes for such a thing.

I guess it’s just not in the current auction so it isn’t drawing as much attention yet?

It feels like a GNU/HURD joke, we’ve seen the faux-archaic GNV stylization elsewhere but, as always here in unix_surrealism, none of us know what’s going on.

Alternate perspective: I use the heck out of session restore, and it has driven me nuts that it hasn’t worked properly under Wayland.

I tend to use different virtual desktops for different projects, so being able to reboot (because of a kernel update and needing to load a module or something) without losing and having to rebuild that state is is super valuable.

…I probably should have checked the byline before posting. It does still come from the same material, just a little more directly.

There’s some weirdness on that because she did some important but not-very-public work at IBM in the 60s with their ACS/“Project Y” effort that did what we later call superscalar/multi-issue processors like …20 years before those terms existed. As part of that she wrote a paper about “Dynamic Instruction Scheduling” in 1966 under her pre-transition identity that is a like retroactive first cause for a bunch of computer architecture ideas.

There was almost nothing about that work in public until Mark Smotherman was doing some history of computing work in the late 90s, put out a call for information about it, and she produced a huge trove of insider information after deciding it was worth exposing the provenance. There’s a neat long-form LATimes piece about the situation which is probably the primary source for the history in OP’s link.

NeXTStep became MacOS (OS X and later) and related systems. It does contain quite a number of BSD pieces that are now periodically pulled from FreeBSD.

The story is fun and I like telling it, strap in:

NeXTStep was basically the MACH microkernel hybridized with BSD (actual Berkley BSD before the court cases and diaspora that lead to Net/Free/Open BSD and Solaris and such) parts to make a reasonably performant modern design Unix-like, with a fancy PostScript based display layer on top, lead by Steve Jobs after he was ejected from Apple, a bunch of folks he effectively took with him, and Avie Tevanian who was the major force behind Mach when it was a research project at CMU.

Between 1988 and 1996 Apple failed like 3 times at building their own next-gen OS. Apple and IBM cooperatively fucked up the Pink/Taligent development process so hard it’s still told like a ghost story to software developers, Copland got out of control with feature creep and empire building, and A/UX, cool as it was, was never going to be a mainstream OS because it contained Unix-brand-Unix and the associated thousand dollar license fee (Also IBM got involved combining some future development of A/UX and AIX for PowerPC and some of the Taligent stuff entered the picture and it turned into a clusterfuck).

So it’s the mid 90s and Apple is shipping an OS from the mid 80s that they had to do hacky shit to make do even cooperative multitasking, and the executives are looking to acquire one that is already done.

Two former heads of the Mac division had left and built companies that tried to build whole computer platforms then pivoted to just selling software, Steve Jobs with NeXT and Jean-Louis Gassée with Be. The exact details of the negotiations about how they chose NeXT over Be are kind of ambiguous and vary from account to account, I’m personally of the opinion that the biggest reason is that OpenStep looked a lot like “Taligent, but not completely bungled.”

So Apple Bought NeXT in 1997 in a scenario better described as “NeXT Bought Apple with Apple’s Money” because all the executives in charge after the shakeup were NeXT folks.

There was an initial plan to more or less slap a OS 8 like Copland-looking GUI on the hybridized Mach/BSD kernel and most of the userland from OpenStep (an environment that at the time was called “Yellow Box”), ship it with a virtualization environment called Blue Box to run legacy MacOS programs, and call it a day. You can even play with the missing link Rhapsody from that era, and the Classic environment that early OS X versions had is the direct descendant of that BlueBox compatibility environment.

Then some of the important software vendors (read: Adobe, whose shitty development practices are why Macs are case insensitive by default to this day) revolted at the idea of having to do ground-up rewrites so Apple designed the Carbon APIs that are kind of a stepping stone between classic MacOS and the native Cocoa APIs that evolved from the Yellow Box deign which are the usual target on modern macOS/iOS.

(The story of how Windows NT - which is the underlayer of all modern windows systems - is basically “The DEC VMS team got pissed off about obviously-dumb management decisions and were looking to leave DEC while Microsoft became aware that OS/2 was failing largely due to bad IBM decisions, so Microsoft hired the core of that team to write the operating system they were designing, moved the few remaining competent folks over from OS/2 to help, and sold it as Windows” is similarly absurd. As the joke goes, it may not be a coincidence that WNT is VMS incremented).

That’s credible.

I find the hardware architecture and licensing situation with AMD much more appealing than Nivida and really want to like their cards for compute, but they sure make it challenging to recommend.

I had to do a little dead reckoning with the list of supported targets to find one that did the right thing with the 12CU RDNA2 680M.

I’ve been meaning to put my findings on the internet since it might be useful to someone else, this is a good a place as any.

On a fresh Xubuntu 22.04.4 LTS install doing the official ROCm 6.1 setup instructions, using a Minisforum UM690S Ryzen 9 6900HX/64GB/1TB box as the target, and after setting the GPU Memory to 8GB in the EFI before boot so it doesn’t OOM.

For OpenMP projects, you’ll probably need to install libstdc++-12-dev in addition to the documented stuff because HIP won’t see the cmath libs otherwise (bug), then the <CMakeConfig.txt> mods for adapting a project with accelerator directives to that target are

find_package(hip REQUIRED)
list(APPEND CMAKE_PREFIX_PATH /opt/rocm-6.1.0)
set(CMAKE_CXX_COMPILER ${HIP_HIPCC_EXECUTABLE})
set(CMAKE_CXX_LINKER   ${HIP_HIPCC_EXECUTABLE})
target_compile_options(yourtargetname PUBLIC "-lm;-fopenmp;-fopenmp-targets=amdgcn-amd-amdhsa;-Xopenmp-target=amdgcn-amd-amdhsa;-march=gfx1035"

And torch, because I was curious how that would go (after I watched the Docker based suggested method download 30GB of trash then fall over, and did the bare metal install instead) seems to work with PYTORCH_TEST_WITH_ROCM=1 HSA_OVERRIDE_GFX_VERSION=10.3.0 python3 testtorch.py which is the most confidence inspiring.

Also amdgpu_top is your friend for figuring out if you actually have something on the GPU compute pipes or if it’s just lying and running on the CPU.

Neat.

I set up some basic compute stuff with the ROCm stack on a 6900HX-based mini computer the other week (mostly to see if it was possible as there are some image processing workloads a colleague was hoping to accelerate on a similar host) and noticed that the docs occasionally pretend you could use GTT dynamicly allocated memory for compute tasks, but there was no evidence of it ever having worked for anyone.

That machine had flexible firmware and 64GB of RAM stuffed in it so I just shuffled the boot time allocation in the EFI to give 8GB to the GPU to make it work, but it’s not elegant.

It’s also pretty clumsy to actually make things run, lot of “set the magic environment variable because the tool chain will mis-detect the architecture of your unsupported card” and “Inject this wall of text into your CMake list to override libraries with our cooked versions” to make things work. Then it performs like an old GTX1060, which is on one hand impressive for an integrated part in a fairly low wattage machine, and on the other hand is competing with a low-mid range card from 2016.

Pretty on brand really, they’ve been fucking up their compute stack since before any other vendor was doing the GPGPU thing (abandoning CTM for Stream in like a year).

I think the OpenMP situation was the least jank of the ways I tried getting something to offload on an APU, but it was also one of the later attempts so maybe I was just getting used to it’s shit.

Don’t trust that they’re 100% compatible with mainline Linux, ChromeOS carries some weird patches and proprietary stuff up-stack.

I have a little Dell Chromebook 11 3189 that I did the Mr.Chromebox Coreboot + Linux thing on, a couple years ago I couldn’t get the (weird i2c) input devices to work right, that has since been fixed in upstream coreboot tables and/or Linux but (as of a couple months ago) still don’t play nice with smaller alternative OSes like NetBSD or a Haiku nightly.

The Audio situation is technically functional but still a little rough, the way the codec in bay/cherry trail devices is half chipset half external occasionally leads to the audio configuration crapping itself in ways that take some patience and/or expertise to deal with (Why do I suddenly have 20 inoperable sound cards in my pulse audio settings?).

This particular machine also does some goofy bullshit with 2 IMUs in the halves instead of a fold-back sensor, so the rotation/folding stuff via iio sensors is a little quirky.

But, they absolutely are fun, cheap hacker toys that are generally easy targets.

You can still readily get crank hand drills, I have a (vaguely) modern one that I use for situations where I want the control/tactile feedback and/or have restricted access or the like. It covers a different set of problems than the standard cordless.

Mine is Fiskars branded and a little plasticky (and not the version they sell currently). I like it enough that I’ll get a nicer one if I kill it.

They don’t have to be specified in a monolithic fashion, but some things - like the input plumbing and session management examples I made - do have to be specified for for software to work when running under different compositors. FD.o basically exists because we already learned this lesson with other compat problems, and solved it without putting it in the X monolith - it’s why things like ICCM and EWMH happened; there were more details than were in the existing APIs that everyone needed to agree on to make software interoperate.

Competing implementations are great, but once you have significant inertia behind competing implementations which are not compatible or at least interoperable, you’ve fragmented the already-small Linux market share into a maze of partially-incompatible micro-platforms. We’re not going to have compositing and non-compositing, we’re going to have 3ish (KDE/Qt [kde], Gnome/Gtk who aren’t even doing documented protocols, and Everyone else - mostly [wlr] extensions) incompatible sets of protocols for basic functionality.

Looking at the slow bitter process to extend or replace components once implementations that rely on them exist, that’s not something to count on. Remember how it took 15 years of contention to eventually transition to D-Bus after CORBA/Bonobo and DCOP? That’s whats about to happen with things like the incompatible gtk and qt session management schemes. And that resolution was forced by the old HAL system using it, not the other parties involved getting their shit together of their own accord.

One place we’re about to see innovation is wayland-stack-bypassing workarounds. Key remapping is currently in that category, the wayland protocols suite punted… so instead, keyd sniffing all the HID traffic at the evdev and/or uinput layer and outputting the rule-edited streams to virtual HID devices. That one does have a certain global elegance (works on ttys!), but it’s also layering violations with privileged processes.

I will preface that Xorg is obviously an unmaintainable mess of legacy decisions and legacy code, and I have both a machine that runs Hyprland and a machine that usually starts Plasma in Wayland mode so the Wayland situation getting to be more-or-less adequate with persistent irritations here and there… but Wayland is trauma-driven-development. It’s former xorg developers minimizing their level of responsibility for actual platform code, but controlling the protocol spec, and in the position to give up on X in time with their preferred successor.

Essentially all of the platform is being outsourced to other libraries and toolkits, who are all doing their own incompatible things (Which is why we have like 8 xdg-desktop-portal back-ends with different sets of deficiencies, because portals were probably designed at the wrong level of abstraction), and all have to figure out how to work around the limitations in the protocols. Or they can spend years bikeshedding about extensions over theoretical security concerns in features that every other remotely modern platform supports.

Some of that outsourcing has been extremely successful, like Pipewire.

Some attempts have been less successful, like the ongoing lack of a reasonable way to handle input plumbing in a Wayland environment (think auto-type and network kvm functionality) because they seem to have imagined their libinput prototype spun out of Weston would serve as complete generic input plumbing, and it’s barely adequate for common hardware devices - hopefully it’s not too late to get something adequate widely standardized upon, but I’m increasingly afraid we missed the window of opportunity.

Some things that had to be standardized to actually work - like session management - have been intentionally abdicated, and now KDE and Gnome have each become married to their own mutually-incompatible half solution, so we’re probably boned on that ever working properly until the next “start over to escape our old bad decisions” cycle… which, if history holds, isn’t that far away.

We’re 15 years in to Wayland, and only in the last few years has it made it from “barely a tech demo” through “Linux in the early 2000s” broken, and in the last year to “problems with specific features” broken … and it is only 4 years younger than the xf86->xorg fork.

The argument was that if you put all your static resources in /usr, you can mount it RO (for integrity, or to use a ROM on something embeddedish) or from a shared volume (it’s not uncommon to NFS mount a common /usr for a pool of managed similar machines).

…that said, many of the same people who made that argument are also the ones that went with making it so systemd won’t boot without /usr populated anymore, so that feature is now less useful because it has to be something your initramfs/initcpio/whatever preboot environment mounts rather than mounted by the normal fstab/mount behavior, and the initcpio/initramfs/dracut schemes for doing that all (1) require a redundant set of tools and network configs in the preboot (2) are different and (3) are brittle in annoying ways.

It still works OK if you’re using a management tool like Warewulf to manage configs and generate all the relevant filesystems and such, but it’s a lot more fucking around than a line in fstab to mount usr once the real system is up like the old days.

Systemd-boot didn’t start as part of systemd, it used to be gummiboot (joke in German, it’s what those little rubber inflatible boats are called).

Systemd absorbed and integrated it in 2015.

It did start at RedHat with Kay Sievers and Harald Hoyer, which makes it unsurprising it was absorbed.

I’ve been transitioning to it as my default choice, I’ve never liked grub2, so I defaulted to syslinux for a long time, but lately systemd-boot is even less of a hassle.

Sure, drop me a note with the details and I’ll see if I can give you a hand. I’m not super expert in all the specifics of the Chromebook ecosystem, but I have good general computer/Unix skills and have hacked a couple so I know where to look for resources.

The near instant heat up is a big part of how I ended up with my Bambino with its “Thermojet”(Thermoblock coil thing) heater.

3s from wake to ready, it takes longer to grind and prep than to heat. I usually pull a blank shot through the clean portafilter into the cup I’m going to pull the shot in so the downstream parts aren’t crashing the temperature, but that’s still seconds.

Ascaso and Decent have more up-market offerings with thermoblock heaters that are similarly fast but offer more control. I wasn’t 5-10x price compelled for my needs, and I’m certainly not over 100x price in to that thing… But it is a great feature that the commercial derived machines don’t do.

I’ve definitely had (good) blends were the components were taken to significantly different roast levels.

AFIK generally the components in blends are roasted separately for added control. Different beans behave differently in roasting so coffee that is blended then roasted will generally not be consistent anyway.

The separation lets a roaster take components to different levels to compliment each, eg. Roast a component with really good body but harsh flavor relatively dark to reduce the perceived bitterness, or keep a component you’re adding for fruity flavors or acidity light so you don’t suppress it’s desirable properties.

The former (harsh but big-bodied) thing is a common trick for Espresso in particular, a lot of really big-bodied beans tend to taste harsh, and that can be reduced with darker roasts without killing thr body. Robusta/Canephora (rather than Arabica) beans especially tend to be big bodied and highly caffeinated and hardy to grow…and have a major burning rubber note to their flavor. Good espresso blends often add some to improve mouth feel…but also cheap coffee products tend to use it, most instant or coffee flavoring starts as Robusta.

Single origin doesn’t automatically mean good coffee, but roasters who bother to source and label a single origin (which can sometimes be as specific as a farm, or broad as a country) will tend to be more mindful of that particular beans’ flavor. Also, smaller fancier roasters will generally sell fresher coffee. Beans that have been sitting roasted in a grocery chain’s “nonperishable” supply chain for months will essentially always be stale, and as soon as you get a taste for coffees that aren’t, you are cursed with that knowledge.

Single origins (and “weird” drying processes other than fully washed) will also tend to have way more character than “just coffee” which is fun and interesting but not always desirable. You can build really delicious (and consistent) coffee with blends in ways that might not be achieveable with a single bean.

I share my SK40 for espresso (usually morning) and aeropress (usually afternoon), and have definitely left it set for the wrong thing occasionally.

The aeropress is a little stiff to press if you put espresso grind in it, the product is usually fine. The underextraced 10ish second espresso shot is a lot more disappointing.