Akane does hate boys!

Do you feed this cat raw steak, or does he get it himself?

Thank you, I did have that wrong.

If you can afford it, a SSD will significant improve your life. Also, any more memory will help.

As others said, you can disable swap.

Are you running the xfce version of Mint? It’s significantly less resources.

Finnish them.

You will probably only see issues if you are using conversion cables, like from HDMI to DP.

I have seen issues with Tripp Lite not detecting video signal on a DP KVM if the device isn’t selected during boot, but the issue is resolved once you hit Windows.

We just finished. We were 0-10 on knocking on doors. Eventually they gave up and kept on trucking.

If it keeps saying your drives missing, and you hang replaced your drives, then the next step is the main board.

I would inspect the m.2 sockets carefully. It would be easiest to use your phone macro setting if you can.

You might also have a heat issue. Check your airflow to be sure you have sufficient flow over the drives and it exits.

Depending on your board, the m.2 lanes connect directly to your processor or possibly your chip set. One of those may be defective. You should check your board documentation to determine which.

If you think it is an issue with the m.2 process you could consider says SATA SSD. It’s not as fast, but it’s still plenty great compared to spinning disks.

I was confused as they have had solar for quite some power, but the article states that this is the second lot they have converted, with and 4.5 Mw of power total.

Yeah, that was my reaction as well. It’s so onion flavored I can’t believe it.

Donald Trump ate my baby.

I used to think that, but increased popular vote could add legitimacy to the results.

Mine are sorted by wood and machine, then by length. If I were to go further than that I would have to increase my separators exponentially.

NCR names their motherboards after NASCAR tracks.

Louisville, Colorado.

I have thought about it, but the assembly process has to be extraordinary simple. I would be terrified to know that the fastener I recommended sheared, taking someone’s life.

Also, there seems to be at least two extremes in DIY. One would be the individual who understands the processes and is doing it to show their technical prowess. The other would be the individual who desperately needs the end product.

I’m predicting it being a false flag attack.

Not that I look down on the reference, but it was in other states.

Talk to people. You may convince someone to either change their vote.

I think they are wrong, but I bet it literally helps them sleep at night. It beats looming dread.