tychosmoose

Rosenbaum complained that the entryway was too small, Wright countered that it was the same size as the entry to a Pullman car, and “I never heard of anyone getting stuck on a train.”

Genius and jackass.

Agreed. The only thing the SOG wins on, for me, is the pliers. If I could put the SOG pliers mechanism on a Leatherman that would be pretty good package.

Nice setup. I really like the custom pouch. that’s the kind of thing I like to make.

Is that elastic webbing stitched as a bit storage?

I had high hopes for the SOG Powerpint. The bitholder is genius, as is its compound leverage for the pliers, like other SOG multitools. And then the can opener snapped off while trying to open a can. Maybe I did it wrong, but I’ve used SAK can openers (new and old style), p-38s, p-51s, pocketknives and even chefs knives to open cans without any trouble. But that Powerpint opener was defeated by a can of tuna. it seems not sharp enough and beveled the wrong way for its placement in the knife. When the can started bending in I stopped and gave it a bit better edge. But it puts the cutting edge a bit away from the rim, and that lets the lid stretch. If you flip it and try going the other way round then the handle gets in the way so you can’t pivot it properly.

After it broke I used the main knife blade and got the can open in 1/10th the time I spent fiddling with the opener. But this ended the Powerpint’s use as my one blade while traveling. Now I prefer a SAK (better scissors too) and Knipex pliers.

houses are expensive everywhere now

True 💀

It could just be that you are in a higher cost housing market, or have big charitable donations. But also, yeah, you’re probably also kinda loaded. 🙃

(at least when compared with the median American)

There are long standing problems with this. Not sure of the exact point of the video, but here is an older article with some info: https://www.newsweek.com/why-are-private-jets-being-subsidized-you-and-me-641890

That is still technically true, but it requires filing your taxes with “itemized deductions” wherein you provide a complete list of all the things that you can deduct from your taxable income before calculating the tax owed. Stuff like mortgage interest, charitable donations, medical and education expenses. Back in 2013 up to 30% of tax filers did that. Mostly this was done by higher income people who had enough income and deductions to put them over the default standard deduction.

The “standard deduction” was increased in big changes to our taxes in 2018, and since then only about 10% of filers itemized. So mortgage interest isn’t usually paid with pre-tax money anymore by up to two thirds of those who did it before.

The other reasons for carrying a low interest rate mortgage are still true.

When I saw that picture I heard the *clack!*

This flag seems to only disable ipv6 on the default Docker bridge network, not daemon-wide. At least per this discussion.

It’s in the dnsutils package.

Well crap. Do you have no ipv6 address now in ip addr?

Guess I gave Docker too much benefit of the doubt and assumed it should failover to v4 once v6 was disabled. Bad assumption on my part.

Could it be a DNS problem? If you dig registry-1.docker.io +short does it return an ipv4 or v6 address?

It looks like there have been sporadic reports of problems from people since last year.

Ok, so it’s probably using NetworkManager. I would try disabling it in /etc/NetworkManager/NetworkManager.conf by adding a block like:

[ipv6]
addr-gen-mode=stable-privacy
method=disabled

Then sudo systemctl restart NetworkManager. Can’t say for sure if this will work. I dislike using NetworkManager on my servers so I can’t test if this works. But hopefully the before/after of ip addr is different.

Although it looks like your ip addr output posted an hour or so ago doesn’t show any ipv6 addressing. Maybe the problem is solved now.

Different programs have different defaults.

But in your situation which would be more helpful - prevent this one docker command from using ipv6 (likely more difficult), or preventing all commands from using your broken ipv6 config (likely easier)?

I have no idea about the first. Maybe some people know this detail. But I’m sure that with a distro and version that you’re running, there are lots of people who could help with the second. Raspberry Pi 3B+ is the hardware. What software are you using?

Docker is a distraction in your problem description.

It’s like if you asked why the top gear in your car isn’t working and gave the model of car and engine type and gearbox. But it’s really that you’re stuck in slow traffic. Focus on the road name and destination to find a faster route.

For your problem, search for how to disable ipv6 for the Linux distribution and version that you have installed. You will find lots of guidance. Or share those details here for someone to help.

Or, better might be to see if there is a way to get ipv6 tunneling working on your connection. It may be possible even if the ISP is unhelpful.

Some routers advertise a routable link local.

Being on-call at any hour is something to consider. With a large enough organization it can reduce the frequency, but it never goes away.

Also, maintenance is scheduled for critical systems at low demand times. It’s another reason to be prepared to work nights.

Per Etymonlone: In early modern English it also could be transitive, “to govern, manage, conduct.”

Comport seems similar in both meaning and reflexivity.

sounds familiar.

Beth?

Fascinated by your interesting content! I am grateful for your creativity! 🙏🍻🤌

openSUSE Tumbleweed is the rolling release, where you may have dependency decisions to make during regular updates. Updates must be done in the terminal.

The more beginner friendly version is openSUSE Leap. That has a longer release cycle, and you use the Discover interface (or yeast, or zypper in the terminal) to update.

Either is pretty friendly. Both have recent KDE.